Inserting The Battery Pack/A Memory Card (Sold Separately) - Sony Cyber-shot DSC-TX5 Mode D'emploi

Inserting the battery pack/a memory card
(sold separately)
1
Open the cover.
2
Insert a memory card
(sold separately).
With the notched corner facing as
illustrated, insert the memory card
until it clicks into place.
3
Insert the battery pack.
Align the battery pack with the
guide inside the battery insertion
slot. Then, pressing the battery eject
lever with the edge of the battery
pack in the direction of the arrow,
insert the battery pack until the
battery eject lever locks into place.
4
Close the cover.
Securely close the battery cover
until you hear the slide lock on the
cover catch in place and so that the
yellow mark under the slide lock can
no longer be seen.
• If foreign matter such as sand gets
inside the cover, the sealing gasket may be scratched and it may cause a
malfunction (page 8).
Note the notched corner facing
the correct direction.
Battery eject lever
GB
GB
17