Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NOTE:
The information contained in this Instruction Manual is designed to assist you in the safe operation and
maintenance of the power tool.
NEVER operate, or attempt any maintenance on the tool unless you have first read and understood all safey
instructions contained in this manual.
Some illustrations in this Instruction Manual may show details or attachments that differ from those on your
own power tool.
NAME OF PARTS
Collet chuck
Spindle
SPECIFICATIONS
Model
Motor
Power Source
Current
No-Load Speed
Max. Wheel Diam.
Collet Chuck Capacity
Weight (without cord)
WARNING:
NEVER use an abrasive wheel, cutting wheel, or any wheel greater than 1" in diameter. Using such wheels
can result in wheel breakage, and will otherwise increase the risk of bodily injury from contact with the
wheel or wheel fragments.
FUNCTIONAL DESCRIPTION
Bearing lid (B)
Nose bracket
7,000 - 29,000 / min
Tail cover
Switch
Housing
Side handle
Fig. 1
GP3V
Single-Phase, Series Commutator Motor
Single-Phase, 120 V AC 60 Hz
1" (25 mm)
1/4" (6.35 mm)
4.0 lbs (1.8 kg)
GP3V
GP5V
4.7 A
2,000 - 8,300 / min
2" (50 mm)
1/4" (6.35 mm)
4.2 lbs (1.9 kg)
English
9
Publicité
Table des Matières
