ergoline Ambition 200 VHP 15 Instructions D'utilisation page 48

Presets
P07 – Measurement of the A/C Voltage on Phase A
Parameter 07 is the measurement of the A/C voltage on phase A.
The reading is immediately displayed, the display will read from 0000 to
0200 Volts, with 0120 as the nominal reading.
– Press to go to Parameter 08 (P08).
P08 – Measurement of the A/C Voltage on Phase B
Parameter 08 is the measurement of the A/C voltage on phase B.
The reading is immediately displayed, the display will read from 0000 to
0200 Volts, with 0120 as the nominal reading
– Press to go to Parameter 09 (P09).
P09 – Measurement of the Average A/C Voltage on Phase A
Parameter 09 is the measurement of the average A/C voltage on phase
A for the previous session, or current session if unit is energized.
The reading is immediately displayed.
– Press to go to Parameter 10 (P10).
P10 – Measurement of the Average A/C Voltage on Phase B
Parameter 10 is the measurement of the average A/C voltage on phase
B for the previous session, or current session if unit is energized.
The reading is immediately displayed.
– Press to go to Parameter 11 (P11).
48
P11 – Measurement of the Internal Operating Temperature
Parameter 11 is the measurement of the unit's internal operating tempe-
rature.
The reading is immediately displayed. Measurement is in Fahrenheit.
– Press to go to Parameter 12 (P12).
P12 – Measurement of the Ambient or Room Temperature
Parameter 12 is the measurement of the unit's ambient or room tempe-
rature.
The reading is immediately displayed. Measurement is in Fahrenheit.
– Press to go to Parameter 13 (P13).
P13 – Measurement of the Average Operating Temperature
Parameter 13 is the measurement of the unit's average operating tempe-
rature during the previous session or current session if the unit is energi-
zed.
The reading is immediately displayed. Measurement is in Fahrenheit.
– Press to go to Parameter 14 (P14).
P14 – Measurement of the Average Ambient or Room Tem-
perature
Parameter 14 is the measurement of the unit's average ambient or room
temperature during the previous session or current session if the unit is
energized.
The reading is immediately displayed. Measurement is in Fahrenheit.