System Settings; Standard Display - LD Systems WS1000G2 Manuel D'utilisation

SYSTEM SETTINGS:

STANDARD DISPLAY

The standard display shows the preselected frequency and volume.
VOLUME
Use the Up and Down buttons to set the desired volume (00 - 63).
GROUP
Push the SET button and hold it for 1 second. GROUP and digit below blink. Push the Up and Down buttons to set
the desired group (1 - 08). Press SET again to confirm.
The display will return to standard after a short period of time of non-activity automatically.
Note: Each of the groups 1 - 08 consists of 12 channels, each corresponding to a specific frequency.
CHANNEL
Push the SET button, hold it for 1 second and press SET again. CHANNEL and 2 digits below blink. Push the Up
and Down buttons to set the desired channel (01 - 12). Press SET again to confirm.
The display will return to standard after a short period of time of non-activity automatically.
Once a specific frequency (group and channel) has been selected, the transmitter (handheld or bodypack) has to
be synchronized to the same frequency (group and channel) via the ASC function.
14