Still Image Recording - JVC GZ-MG555U Manuel D'utilisation

Still Image Recording

Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select
mode.
MODE
#
The lamp on the camera lights up.
8 To change the picture quality
Change the settings in [QUALITY].
( pg. 47)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to
[ON]. ( pg. 48)
8 To change the image size
Change the settings in [IMAGE SIZE].
( pg. 47)
8 To take close-up pictures (up to
approx. 51 cm [1.68 ft])
Press the TELE MACRO button (t
Indicator appears).
8 To record using the timer
Press the z button several times to
display the H (2 seconds) or I (10
seconds) indicator.
NOTE
If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically to
conserve power. To turn the camera on again when using the battery pack, set the power/mode switch
to OFF, then to ON. When using the AC adapter, perform any operation such as zooming.
#
(still image)
The switch returns
to the original
ON
position when it is
OFF
released.
Press the PLAY/REC button to
select recording mode.
SELECT
PLAY/REC
Press and hold the SNAPSHOT
button halfway.
The ? indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button to
start recording.
40
640 [ 9 9 9 9 ]
4:3 FINE
N
[
640
FINE
[ 9 9 9 9 ]
FINE
17