Still Image Recording; Playing Back/Deleting Files On This Unit - JVC Everio GZ-E505 Guide De L'utilisateur

Still Image Recording

Check if the
recording mode
is B still image.
If the mode is A
video, tap A on the
touch screen, then
tap B to switch.
Image stabilization only starts when the button is pressed halfway.
0
You can also tap Q on the touch screen to record. However, focus cannot be set by pressing halfway.
0

Playing Back/Deleting Files on this Unit

Select and play back the recorded videos or still images from an index screen (thumbnail display).
Tap A or B to select the video or still
image mode.
Tap F on the touch screen to select
the playback mode.
Tap E to return to the recording mode.
Tap on the file to play back.
≪REC PLAY
Tap e to pause playback.
Tap u to return to the index screen.
.
To capture a still image during playback
o
Pause the playback and press the SNAPSHOT button.
NOTE
While this unit may be used with the LCD monitor reversed and closed, the
0
temperature rises more easily. Leave the LCD monitor open when using this unit.
The power may turn off to protect the circuit if the temperature of this unit rises too much.
0
Set the focus on the subject.
Press halfway
Lights up in green when
focused
Take a still image.
Press fully
Lights up during still
image recording
Volume adjustment during playback
Turn down the
volume
To delete unwanted files
Tap R.
Tap on the files to delete.
DELETE
SEL ALL REL ALL SET
Tap [SET].
Tap [EXECUTE] when the confirmation
message appears.
Tap [OK].
Turn up the volume
A delete mark appears on
the selected file. To remove
the delete mark, tap again.
QUIT
9