Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
15. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
16. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
18. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
19. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
20. Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
Battery tool use and care
24. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
25. Use
power
tools
designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
only
with
specifically
26. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal
to
terminals together may cause burns or a fire.
27. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may
cause irritation or burns.
Service
28. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
29. Follow
instruction
changing accessories.
30. Keep handles dry, clean and free from oil and
grease.
CORDLESS PLATE JOINER
SAFETY WARNINGS
1.
Blades must be rated for at least the speed
marked on the tool. Blades running over rated
speed can fly apart and cause injury.
2.
Always use the guard. The guard protects the
operator from broken blade fragments and
unintentional contact with the blade.
3.
Use only the blades specified for this tool.
4.
Never operate the tool with the blade locked in
exposed position or without the blade cover
secured properly in place.
5.
Make sure that the blade slides smoothly
before operation.
6.
Check the blades carefully for cracks or
damage before operation. Replace cracked or
damaged blades immediately.
7.
Make sure that the flange fits in the arbor hole
when installing the blade.
8.
Inspect for and remove all nails or foreign
matter from the workpieces before operation.
9.
Always place the workpieces on a stable
workbench.
10. Secure the workpieces firmly with clamp or
vise.
11.
NEVER wear gloves during operation.
12. Hold the tool firmly with both hands.
13. Keep your hands and body away from the
grooving area.
14. Run the tool for a while without the blade
pointing toward anybody. Watch for vibration
3
another. Shorting the battery
for
lubricating
and
GEB093-1
Publicité
Table des Matières
