InnoCigs TEROS Manuel D'utilisation page 51

INNOCIGS TEROS – USING THE DEVICE
Enable Device / Vaping
When you pull on the mouthpiece to inhale the vapor of your e-cigarette, the device is activated. If the puff
length exceeds an interval of 15 seconds, the device automatically stops the power output. Once the LED
indicator turns off, you can start again.
Filling of E-Liquids
1. Remove the tank by gently pulling it from the battery.
2. Open the rubber flap and insert the liquid directly into the tank. Make sure that
you do not overfill the device.
3. Close the device again with the flap strap, so that no liquid can escape, and put
the tank back on the battery. Make sure that the pressure sensor and the sensor
hole are on the same side.
49