Before You Start; Packing List; Assembly - Echo PPF-236ES Manuel D'utilisation

Packing list

The following parts are packed separately in the packing box.
When you have unpacked the box, please check the parts that it contains.
Contact your dealer if anything is missing or broken.

Assembly

Read the operator's manual carefully to ensure that you assemble the product correctly.
Using a product that has been incorrectly assembled could lead to an accident or serious injury.
Cutting attachment to drive shaft installation

Before you start

Power head
Drive shaft assembly
Cutting attachment with guide bar and saw chain
Operator's manual
Socket wrench
L-wrench
Safety goggles
Shoulder harness
Guide bar cover
WARNING
1. Loosen the two screws (A) and remove locator screw (B) on
cutting attachment.
2. Slide the cutting attachment onto the shaft housing until the
hole in the neck of the cutting attachment is aligned with the
hole (C) in the housing. (It may be necessary to rotate the
saw chain slightly to align the internal pinion and drive shaft.)
3. Insert locator screw (B) into hole (C) and tighten to snug.
4. Tighten bolts (A), clamping the cutting attachment onto the
housing.
9
Before you start