Cleaning The Hydrim C51W; Filter And Wash Arm Maintenance; Filter Maintenance - SciCan HYDRIM C51w Mode D'emploi

6. Care and Maintenance

6.3 Cleaning the HYDRIM C51w

To clean outer surfaces and the decal covering the touchscreen, use a soft cloth
moistened with soap and water or a surface disinfectant. Do not use harsh cleaning
chemicals.
If preparing the unit for transport or storage, waste water should be removed
from the sump.
Waste water in the unit may contain biological contaminants. Use a mechanical means
to siphon the contents. Wear disposable rubber gloves. Dispose of absorbent material
according to biological waste disposal regulations.

6.4 Filter and Wash Arm Maintenance

Fine filter – beneath coarse filter
Page 22
Ring

Filter Maintenance:

Inspect the coarse and fine filters in the
bottom of the chamber daily for debris
and clean if necessary. To clean, remove
the filter (turn the ring to release it), rinse
under a tap and reassemble. Ensure that
the filter is firmly locked into position when
replaced.
Coarse filter
Upper wash arm
Wash Arm Maintenance:
If you see that the wash arms are not
turning easily, remove them. To remove
the upper arm, unscrew the collar. To
remove the lower arm, grasp both ends
and pull up. Rinse under a tap and
reassemble.
Lower wash arm