Remote Control - Franke FCBI 926 Manuel D'utilisation

5. REMOTE CONTROL

The remote control is powered by a CR2032
type 3 V battery (not included).
• Do not place the remote control near
heat sources.
• Do not discard the batteries with normal
waste, they must be put into the specific
containers.
Motor On/Off.
-
-
Lights On / Off.
Press and hold for 2sec to turn the Hood
lights On/Off at reduced intensity.
Activates/Deactivates Intensive operation
Brief pressure: Activates/Deactivates the
Delay function: automatic switch-off with a
30' delay. The display shows the operating
speed and the dot at the bottom right
flashes once a second.
Press for 2 seconds: Activates/Deactivates
the 24h function: turns the suction motor
on at speed one and effects one 10 minute
extraction every hour. The display shows
the number 24 and the dot at the bottom
right flashes once a second.
Increases the working speed each time it
is pressed.
Decreases the working speed each time it
is pressed.
6. LIGHTING
• For replacement contact technical support
("To purchase contact technical support").
12