Sharp PN-655E Mode D'emploi page 36

Settings and Adjustments
Switching the screen size (When the input mode is DIGITAL/ANALOG)
Even when the screen size is changed, the display may remain the same depending on the input signal.
Displays image so it fills the
entire screen.
Displays image so it fills the
screen vertically, while
maintaining the original
aspect ratio.
Switching the screen size (When the input mode is COMPONENT/VIDEO)
The desired screen size can be selected to suit the input signal.
Even when the screen size is changed, the display may remain the same depending on the input signal.
Displays the image of the
aspect ratio of 4:3 so it fills
the entire screen by
stretching the image.
Displays the entire image of
the aspect ratio of 4:3
without changing the
aspect ratio.
* If "DotbyDot" is selected when the VIDEO or COMPONENT (480i or 480p) image
is displayed, the image quality cannot be changed by adjusting the value of
"SHARPNESS" from the VIDEO ADJUSTMENT menu.
34
E
WIDE
Displays the image of the aspect
ratio of 4:3 so it fills the entire
screen with the same aspect
ratio. The upper and lower portion
of the image may be cut off.
NORMAL
Displays the dots of the
signals input from the
connected PC as the
corresponding dots on the
screen. (See page 56.)
WIDE
Displays the image of the aspect
ratio of 4:3 so it fills the entire
screen with the same aspect
ratio. The upper and lower portion
of the image may be cut off.
NORMAL
Displays the dots of the
input signals as the
corresponding dots on the
screen.*
ZOOM 1
Use this size if ZOOM 1
cuts off the subtitles.
DotbyDot
ZOOM 1
Use this size if ZOOM 1
cuts off the subtitles.
DotbyDot
(Continued)
ZOOM 2
ZOOM 2