Changing The Measurement Display Mode (F2) - Nikon COOLSHOT 80 i VR Manuel D'utilisation

COOLSHOT 80 i VR only
■ Changing the measurement display mode (F2 )
Factory default setting is golf mode. Golf mode displays actual distance in upper digits,
and slope adjusted distance (horizontal distance ± height) in lower digits.
1 . From standby, a long press (1 .5 seconds or more) of the MODE button, then a short
press (less than 1 .5 seconds) of the MODE button displays the setting menu of the
measurement display mode (F2 ).
2 . Short press (less than 1 .5 seconds) of the PWR button switches the measurement
display mode.
3 . After setting, a long press (1 .5 seconds or more) of the MODE button or unoperated
more than 8 seconds returns you to standby.
Modes are switched in the following order. Displayed items differ according to each setting mode.
Golf mode:
Slope adjusted distance (horizontal
distance ± height) and actual distance
Incline
Decline
Horizontal distance and height mode
Incline
Decline
Actual
distance
Slope adjusted
distance
(horizontal distance
± height)
Height
Horizontal
distance
Actual distance mode
N/A
N/A
Actual distance and height mode
Incline
Decline
Actual
distance
Height
Actual
distance
15
En
Es
Fr
Pt