PACLITE Equipment CRX60H Manuel De L'opérateur page 13

2. Check and clean the air filter element, re-lube the element in accordance with the engine
manufacturer's recommendations. If operating conditions are unusually dusty and severe, filter
element cleaning should be done more frequently.
3. Check oil level in crankcase of engine and replenish as necessary. Check the oil level in the
ramming cylinder according to the following procedures:
•
Make sure that the machine has not been run in the last 10 minutes.
•
Set the machine on a level surface and remove the oil plug.
•
The top surface of the oil must be seen just below the lower rim of the hole on the oil sight glass.
Replenish as necessary.
NOTICE: Care should be taken not to overfill the rammer with oil. Overfilling will cause excessive load
on the engine, which may result in poor or irregular vibration.
Maintenance: Every 50 hours or weekly
Check for loose bolts and nuts. Retighten if necessary.
Maintenance: Every 200 hours
Check the ramming cylinder oil. Do not overfill.
Fuel, Lubricant and Spark Plug
Fuel
Model
Type Capacity
TR-600
CRX68
Unleaded
TR-670
Gasoline
TR-740
Engine Crankcase
Type Engine
EH09D
2L
GX100
SAE
10W – 30,
API, SG,
3L
SF/CC,
GX120
CD
3L GX120
Ramming Cylinder
Capacity Type
0.3L
0.6L
SAE
10W – 30,
API, SG,
SF/CC,
0.6L
CD
0.6L
Capacity
0.7L
0.7L
0.8L
0.8L
11