Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly instructions
Step 1
Assemble the lock sheet (27) and the
adjustable round wheel (28) on the rear
stabilizer(19).
Attach the rear stabilizer (19) to the
frame (1) with bolts (9) / (9B), curved
washers (6), spring washers (7) and do-
med nuts (20).
Assemble the front stabilizer (2) to the
main frame (1) by bolts (9A), the curved
washers (6), the spring washers (7) and
the domed nuts (20).
Step 2
Assemble the supporting tube for pe-
dal (11L&11R) to the rolling axle by
the screw cap (116), nylon nut (114),
flat washer(115) and the plastic flat
washer (41) as shown in fig.2-1.
Assemble the pedal (21) to the sup-
porting tube for pedal (11L&11R) with
bolt (73) as shown in fig.2-2.
Use the belt for wheel (122) to hold
the wheel (38) on the sliding beam as
shown in fig.2-3.
Fix the belt for wheel (122) by Allen
bolt (9), flat washer (8) and spacer
(121) as shown in fig.2-4.
Assemble
the
cover
for
wheel
(78L&78R) to the supporting tube
for pedal (11L&11R) by bolts (111) as
shown in fig. 2-5.
28
Publicité
Chapitres
Table des Matières
