Skandika Fitness CARBON ADVANCE Instructions De Montage Et Mode D'emploi page 37

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Advance Mode
Within this mode you can exercise with a program profile (preset). Mountain- and valley courses for
advanced users: After selecting ADVANCED mode and "MODE/ENTER"-button for confirmation, „AD-
VANCE 1" appears on the display (figure 14). Choose one of the 4 programs (1 to 4) and press "MODE/
ENTER" to confirm. You may now preset a target value for "TIME" by using "UP", "DOWN" and "MODE/
ENTER". Press "START/STOP" to start workout. You may change the tension level at any time during
exercise with "UP" and "DOWN". To pause your workout, press the „START/STOP "-button again. Press
"RESET" to return to main menu.
Fig. 14
Sporty Mode
Within this mode you can exercise with a program profile (preset). Mountain- and valley courses for
sporty users: After selecting SPORTY mode and "MODE/ENTER"-button for confirmation, „SPORTY 1"
appears on the display (figure 15). Choose one of the 4 programs (1 to 4) and press "MODE/ENTER" to
confirm. You may now preset a target value for "TIME" by using "UP", "DOWN" and "MODE/ENTER".
Press "START/STOP" to start workout. You may change the tension level at any time during exercise with
"UP" and "DOWN". To pause your workout, press the „START/STOP "-button again. Press "RESET" to
return to main menu.
Fig. 15
Cardio mode (H.R.C.)
After selecting this mode (press "MODE/ENTER" to confirm) you are in the heart frequency controlled
mode. You can run an automatically steered training depending on your pulse frequency. Use "UP",
"DOWN" and "MODE/ENTER" to set your age (figure 16). Then press "UP" or "DOWN" to select one of
the following alternatives:
(figure 17) = 55% Max H.R.C. - - Target H.R. = (220 – AGE) x 55%
75% Max H.R.C. - - Target H.R. = (220 – AGE) x 75%
90% Max H.R.C. - - Target H.R. = (220 – AGE) x 90%
TAG = Target H.R.C. - - Workout by your target heart rate value.
In "TAG" mode, use „UP/DOWN"-buttons for direct input of the target pulse value (default: 100). You
may now preset a target value for "TIME" by using "UP", "DOWN" and "MODE/ENTER". Press "START/
STOP" to start workout. To pause your workout, press the „START/STOP "-button again. Press "RESET"
to return to main menu.
37

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sf-1920

Table des Matières