Sony SCD-XE670 Mode D'emploi page 21

About "Large" or "Small" speaker
A "Large" speaker is a speaker that can
reproduce bass frequencies plentifully. If
you select "Small" for the surround
speakers, the bass frequencies will come
from the front speakers and/or sub woofer.
For normal use, select "MCH Direct" or set
all the speakers to "Large" (ex. "5 – Large +
SW," "5 – Large," etc.). If the sound is
noisy or the Multi-channel playback is not
effective while playing a Multi-channel
Super Audio CD, change the settings of the
speakers concerned to "Small."
4
Turn lAMSL until desired mode
appears in the display.
5
Press lAMSL.
The output level balance setting display
appears.
To set the output level balance, go to Step 4
in "Adjusting the output level balance on
the front panel of the player" on page 21 or
Step 2 in "Adjusting the output level from
the remote" on page 22.
To return to the normal display, press
MENU.
Notes
• The Multi-channel management function does not
work when you select "MCH Direct" (you cannot
set the output level balance of each speaker).
• The front speaker setting is set to "Large"
automatically when you set the Sub woofer to "––."
• When you play a track that does not contain the
LFE* signal, the signal for the Sub woofer does not
output. Therefore, when you select "MCH Direct,"
"5 – Large + SW," or "No – CNTR + SW," no
signal outputs from the Sub woofer. However, when
you select "5 – Small + SW" or "FRT – Large +
SW" (when you set the speaker setting to "Small"),
the bass frequencies will come from the sub woofer.
* Low Frequency Enhancement (described as ".1
CH")
Adjusting the output level
balance of each speaker
You can adjust following items with the Multi-
channel management function:
CNTR BALANCE
The relative output level balance between the
front speakers (FRONT L/R) and the center
speaker (CENTER)
SURR BALANCE
The relative output level balance between the
front speakers (FRONT L/R) and the surround
speakers (SURR L/R)
SW BALANCE
The relative output level balance between the
front speakers (FRONT L/R) and the sub
woofer (SUB WOOFER)
Note
Some adjustment may not work depending on the
Multi-channel playback mode that you selected.
Adjusting the output level balance
on the front panel of the player
You can adjust the output level balance of each
speaker while listening during playback. You
can also adjust while listening to the test tone
during stop mode.
1
Press MENU.
2
Turn lAMSL until "LEVEL
ADJUST" appears in the display.
3
Press lAMSL.
During playback, go to Step 6.
4
Turn lAMSL until "TONE ON"
appears in the display.
5
Press lAMSL.
The test tone issues from the speakers in
sequence with the speaker type appearing in
the display.
continued
21
US