Playing A Disc - Sony SCD-XE670 Mode D'emploi

Compatible Disc Types (continued)
2 channel + Multi-channel Super
Audio CD
This disc consists of the 2 channel playback
area and the multi-channel playback area.
Press MULTI/2CH to select the playback area
you want to listen to.
You can select the default playback area (2
channel playback or multi-channel playback
area).
1
During stop mode, press MENU.
2
Turn lAMSL until "M/2CH
SELECT" appears in the display.
3
Press lAMSL.
The current playback area appears.
4
Turn lAMSL to select desired
playback area, then press
lAMSL.
Incompatible Discs
This player cannot play the following discs. If
you try to play them, the error message "TOC
Error" or "No Disc" will appear or there will be
no sound.
• CD-ROM
• DVD, etc.
10
US
2 channel playback area
Multi-channel playback
area

Playing a Disc

The operations for normal play and the basic
operations during play are explained below.
1
Turn on the amplifier. Turn down the
volume level to the lowest.
2
Select the player position using the
input selector on the amplifier.
3
Press POWER to turn on the player.
4
Press A OPEN/CLOSE to open the disc
tray, and place a disc on the tray.
With the label side up
5
Press SACD/CD to select the SACD or
CD.
Each time you press the button, the SACD
or CD appears alternately in the display.
Select the type of disc on the tray. For
details, see page 9.
6
Press H.
Playback starts from the first track. If you
want to start playing from a specific track,
turn lAMSL to select the track
number before pressing H.
7
Adjust the volume on the amplifier.