Listening To A Multi-Channel Super Audio Cd (Multi-Channel Management Function) - Sony SCD-XE670 Mode D'emploi

Changing the contents of the
program
You can change the contents of the program in
stop mode.
Do the following:
To
1 Press CHECK repeatedly
Erase a track
until the track number you
want to erase appears.
2 Press CLEAR.
Press CLEAR.
Erase from the
Each time you press the button,
last track in the
the last track of the program is
program
erased.
Press ./> on the remote
Add a track to
to select the track you want to
the end of the
add, then press PROGRAM on
program
the remote. When using the
remote, press the number
button of the track to be added.
When you operate on the
player, turn lAMSL
until the track number you want
to add appears, then push
lAMSL.
Hold down CLEAR or x (for
Erase all tracks
about 2 seconds) until "Prog
CLEAR" appears in the
display.
Listening to a Multi-
channel Super Audio CD
(Multi-channel
management function)
This player is equipped with a Multi-channel
management function that sets the playback
mode of the Super Audio CD by the DSD-DSP
(built into the player) according to the layout or
size of your speaker.
Example of the speaker layout
Front speakers
L
Center speaker
L
L
Sub woofer
Surround speakers
To set the Multi-channel management:
1 Select the appropriate preset playback mode
(2 channel playback or Multi-channel
playback).
2 Adjust the output level balance of each
speaker (only when you select the Multi-
channel playback mode).
Notes
• This features only work when you play the Super
Audio CD.
• You may not be able to adjust the output level
balance depending on the speaker layout mode that
you selected.
R
R
R
continued
19
US