Electrical Connection - Amana AMAP101AB Guide D'utilisation Et D'entretien

Installing/replacing the batteries
in the remote
NOTE: The remote uses two AAA 1.5V batteries (included).
Replace batteries when the battery indicator in the upper right
corner of the remote display is empty.
To remove the batteries:
Remove the battery compartment cover and remove the
batteries.
To reinstall the batteries:
Place the batteries into the battery compartment as shown, then
reinstall the cover.
NOTE:
Do not drop the remote control; this may damage the remote
■
control.
Remove the batteries if the remote control is not used for a
■
month or longer.
Dispose of used batteries responsibly.
■

Electrical Connection

1.
Plug into grounded 3-prong outlet
Plug into a grounded 3-prong outlet.
Press the RESET button on the power supply cord.
See "Electrical Requirements."
7