EMAK efco DS 2000 Manuel D'utilisation Et D'entretien page 84

Table des Matières

Publicité

Use ONLY nylon lines. The
use of metal lines, plasticised metal lines
and/or lines not suitable for the head can
grass caught under the guard.
Do not use the machine for
sweeping, tilting the cutting line head. The
small stones 15 metres or more, causing
device parallel to the ground.
be thrown, which could harm people and ani-
mals and cause damage.
hard.
• Cutting round trees
be replaced.
-
ing position before starting the motor.
fore storing in any enclosure.
To reduce fire hazards, clean the machine
thoroughly to get rid of any remains of grass,
tainers with the cut debris inside the stor-
age area.
-
others:
– After each use, remove the accumulator
age.
– Correct maintenance is essential to main-
tain the original efficiency and safety of the
machine over time.
-
dition.
– Never use the machine with worn or dam-
aged parts. Damaged parts are to be re-
-
placed and never repaired.
-
– Only use original spare parts. Parts that are
not of the same quality can seriously dam-
age the equipment and compromise safety.
-
the accumulator from its compartment.
-
13
Allow the motor to cool be-
For your safety and that of
During maintenance, remove
-
-
-
-
-

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Oleo-mac bc 200

Table des Matières