EMAK efco DS 2000 Manuel D'utilisation Et D'entretien page 83

Table des Matières

Publicité

For your safety and that of
others:
re sponsible for accidents or hazards oc-
curring to other people or their property.
2) Always wear suitable clothing when using
the machine. Your dealer can provide you
with all the information on the most suit-
able accident-prevention devices to guar-
antee your safety.
and remove anything that could be thrown
up by the machine or damage the cut-
ting de vice (stones, branches, iron wire,
bones, etc.).
4) Be careful of flying debris coming from
the cutting device.
5) Stop the motor and remove the accumula-
tor from its compartment.
– if the machine starts to vibrate abnor-
mally: find the cause of the vibration
imme dia tely and have it inspected at a
Spe cia li sed Centre;
– whenever you leave the machine unat-
tended.
IMPORTANT Remember that an electric grass
others. To respect people and the environment:
– Avoid using the machine in environments or
provisions for the disposal of waste materials
after cutting.
– To avoid the risk of fire, do not leave the ma-
provisions for the disposal of damaged parts or
the environment.
disorders (also called "Renaud's syndrome"
or "white hand"), especially to people suf-
fering from circulation disorders. The symp-
toms can regard the hands, wrists and fin-
gers and are shown through loss of sensitiv-
ity, torpor, itching, pain and discolouring of
fects can be worsened by low ambient tem-
peratures and/or by gripping the handgrips
the length of time the machine is used must
be reduced and a doctor consulted.
must always be firmly held in both hands,
the belt.
des of any type with this machine is prohib-
ited.
that the operator is ALWAYS situated behind
the cutting device.
after removing the accumulator from its com-
partment.
– Release the lever (1);
– pull or push the connection pipe (2) until it
reaches the desired length.
• Aligning the cutting device
– Release the button (3);
-
• Cutting limiter
12
The use of metal or rigid bla-
-
-

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Oleo-mac bc 200

Table des Matières