Nameplate - Hitachi WH 18DBFL Instructions De Sécurité Et Mode D'emploi

English
2. Battery Charger (UC18YFSL)
SPECIFICATIONS
1. Cordless Impact Driver
Model
No-load speed
Capacity
Tightening torque
Bit shank size
Rechargeable battery
Weight
2. Battery Charger (UC 18YFSL)
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to temperature and power source voltage.
10
Cord
Pilot lamp

Nameplate

5/32" (M4) – 5/16" (M8) (Small screw)
3/16" (M5) – 9/16" (M14) (Ordinary bolt)
3/16" (M5) – 15/32" (M12) (High tension bolt)
Maximum 1,460 in-lbs {165 N·m 1,685 kgf·cm}
Tightening is 9/16" (M14) high tension bolt, when fully
charged at 68°F (20°C) temp.
BSL1830: Li-ion 18 V (3.0 Ah)
Guide rail
Fig. 2
WH18DBFL
0 – 2,900 /min
Tightening time: 3 sec.
1/4" (6.35 mm) Hex.
3.5 lbs (1.6 kg)
Single phase: AC 120 V 60 Hz
Approx. 45 min.
DC 14.4 V – 18 V
DC 3.5 A
1.1 lbs. (0.5 kg)