Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(1) Omega-holders
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
Screw one clamp each via a M10 screw and nut onto the Omega-holders.
Insert the quick-lock fasteners of the first Omega-holder into the respective holes on
the bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the
second Omega-holder.
44/117
00024314.DOC, Version 1.5
Publicité
Table des Matières
