Inventum VVW6008AW Manuel D'utilisation page 47

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. Place the dishes correctly in the lower basket.
2. Do not place the dishes incorrectly in the lower basket.
ADJUSTING THE HEIGHT OF THE RACKS OF THE UPPER BASKET
The racks can be moved up to create more space in the upper basket, for example to place different-sized glasses
under the racks or to place cutlery items on the racks.
1. Move the racks (A) up or down.
STARTING THE APPLIANCE
1. Push the on/off button to start the appliance. The indicator on the on/off button goes on.
CHOOSING A PROGRAM
Note:
For an overview of the programs, refer to section
1. Use the program selector button to choose a program. The indicator for the program comes on.
2. Use the timer button to delay the start time of the program. Refer to section
3. Use the half-load button to add the half-load option to the selected program.
Note:
If the half-load option is not compatible with the selected program, a buzzer sounds.
4. If necessary, cancel the half-load option by pushing the half-load button again until the corresponding indicator
goes off.
5. Push the start/pause button to start the program.
CHANGING THE PROGRAM
You can change the program while the appliance is running.
1. Push the start/pause button.
2. Wait until the program stops.
3. Use the program selector button to choose another program.
4. Push the start/pause button.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed for 3, 6, or 9 hours.
1. Push the timer button to delay the start time of a program. Every time you push the button, the indicator for the
next delay interval goes on.
2. Push the timer button again to increase the delay of the start time or to cancel the timer.
3. Push the start/pause button to activate the timer.
The program will start when the timer has finished.
RESETTING THE PROGRAM
You can reset the program while the appliance is running.
'Programs'
.
'Delaying the program'
(Figure 17)
(Figure 18)
(Figure 19)
.
English
47

Publicité

Table des Matières
loading

Table des Matières