Skil JS314901 Guide D'utilisation page 15

Move the foot slightly forward and tilt it to the required angle ( 0
(0°or 45°) that is marked on the base bracket. The foot has indents at 0
right) for easy angle setting (Fig. 12 & Fig. 13).
Fig. 12
Move the foot slightly backward until the lock pins locate in the indents at 0
(Fig. 14 & Fig. 15).
Fig. 14
Fig. 15
Make sure that the lock pins are situated in the indents at the angle you select. Pivot the bevel
lever back to lock the foot.
Fig. 13
45º
Indents
Lock Pins
o o
or 45 ) using the scale
o o
and 45 (tilt left or
0º
45º
o
or 45
o
15