Wagan Tech PURE LINE 3000 Guide D'utilisation page 17

PROBLEM: Continuous Buzzing Sound
Reason
Input voltage is below 10.5 volts.
Poor or weak battery condition.
Poor or loose cable connection.
Inadequate power being delivered to
the inverter or excessive voltage drop.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2018 Wagan Corporation. All Rights Reserved.
Solution
Keep input voltage above 10.5 volts.
Recharge or replace battery.
Inspect terminals and tighten all
connections.
Use heavier gauge DC cables.
Keep cable length as short as possible.
16