Initial Operation; Default Setting - Becker Centronic TimeControl TC511 Notice De Montage Et D'utilisation

Assembly and Operating Instructions
Press the button once to „wake up" the timer. Now you can select the language
with the +/- buttons and accept it with the OK button. The clock is in automatic
mode.
TIME/DATE: current GMT and current date
PROGRAMME: ASTRO -> BLOCK -> IDLE PERIOD (1-5)
SETTING: HOLIDAY OFF
light sensor SUN 05 sunlight value
(if light sensor is connected)
END LIMIT, location
SUMMER/WINTER ON
FUNCTION: ROLLER SHUTTER, EXPERT MODE OFF
Note
When the RESET button is pressed (with a ballpoint pen or similar), the
TC511 reverts to the default setting.
Except menu levels of function, language and city.
46
Initial operation
Default setting
s 06:30,
t no default idle period
IDLE PERIOD (6,7)
s 08:00,
t no default idle period