Automatic Door Opening - Gaggenau RB472705 Notice D'utilisation

Switching rest mode on
1. Press à button to open the main menu.
Press / button to open the view Rest mode duration.
2.
3. Press A/@ buttons to change the duration.
4. Press I button to start.
The appliance switches all listed functions off.
Switching rest mode off
After the selected time elapses, the appliance
▯
switches over to normal operation.
To end rest mode before expiry of the selected time,
▯
press & button.

Automatic door opening

The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the door.
9
CAUTION
Repeatedly closing the door too early will cause
automatic door opening to wear out or fail.
Do not close the door as long as automatic door
opening is still moved out.
If you have nevertheless closed the door, leave it
closed for 5 minutes. Automatic door opening will
re-adjust itself.
Open the menu item Automatic door opening of
refrigerator compartment:
1. Press à button to open the main menu.
Press B button to move to the Basic settings menu.
2.
3. Press ™ button to open the menu.
Press C button to move to the menu item Automatic
4.
j
door opening .
To change the setting, press % button.
5.
Open menu item Automatic door opening of freezer
compartment:
Press à button to open the main menu.
1.
2. Press B button to move to the Basic settings menu.
Press ™ button.
3.
4. Press C button to move to the menu item Automatic
k
door opening .
5. To change the setting, press % button.
Switching on Push-to-open system
In an installation situation without handles you can select
the Push-to-open system. Your appliance will then open a
crack if you press lightly on the door.
Note: Please note that automatic door opening is
disabled if Rest mode is activated.
1.
Open menu item Automatic door opening of the
refrigerator or the freezer compartment.
2.
Select menu item Push-to-open system.
3. Press ™ button.
4.
Select menu item Opening force. Here you can select
the level of force required to activate automatic door
opening.
5.
Select menu item Opening duration. Here you can
select how long the door should remain open a crack
before it closes again automatically.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door is
still ajar.After the selected opening duration elapses,
the appliance will close the door automatically.
Switching on Pull-to-open system
In an installation situation with handles you can select the
Pull-to-open system. Your appliance will support you in
opening the door as soon as you pull on the handle.
1.
Open menu item Automatic door opening of the
refrigerator or the freezer compartment.
2.
Select menu item Pull-to-open system.
3. Press ™ button.
4.
Select menu item Opening force. Here you can select
the level of force required to activate automatic door
opening.
Switching off automatic door opening
1.
Open the menu item Automatic door opening.
2.
Select menu item Off.
3. Press ™ button.
Operating the appliance
en-us
21