Steatite Stable Model Components; Shielded Horizontal Model Components; Specific Installation Procedures; Setting The Temperature - Atlantic CHAUFFÉO Notice D'utilisation Et D'installation

EN
Your water heater: Wiring diagrams
II.4 Steatite stable model components
200 L
II.5 Shielded horizontal model components
III. Specific installation procedures
Adjusting the temperature
The factory temperature setting is 65° C.
The temperature may be lowered
by turning the wheel.
IV. Specific maintenance conditions
Parts that can be replaced
• Thermostat
• Cover
• Heater body (only for Steatite water heaters)
The seal must be replaced if the heater body is replaced or opened.
Any replacement operation must be performed by a qualified person using
the manufacturer's original parts.
Thermostat
Thermal safety
mechanism
Heater element
Power supply cable
+ -
-
• Heater element
• Seal
250 and 300 L
Thermostat
Thermal safety mechanism
Power supply cable
Potentiometer
+
+
-
53