EN
Installation Manual: Fitting the water heater
3.4 Horizontal wall-mounted water heater- Side connection
Essential:
Align the pick-ups vertically with the hot water outlet (red) above the cold water (blue).
CEILING
Mounting procedure:
- Assemble the belts and brackets using the nuts and bolts
in the package without tightening them (figs. 1 and 2)
- Fit the brackets with their belt on the support (wall,
ceiling, floor), then tighten
- Position the water heater using one of the 4 mounting
options.
- Complete the mounting procedure by tightening
the belt nuts on the bracket
WALL
figure 1
FLOOR
figure 2
x 2
39