Remote Control - Danby DPA060B7WDB Manuel Du Propriétaire

OPERATING INSTRUCTIONS

REMOTE CONTROL

1. Power Button: Press to turn the appliance on or
off.
2. Mode Button: Press to select the desired mode.
3. Fan Button: Press to select fan speed.
4. Sleep Button: Press to start the sleep function.
5. LED Button: Press to turn the LED display on or
off.
6. Timer Off Button: Press to set the Auto-off timer.
7. Timer On Button: Press to set the Auto-on timer.
8. Shortcut Button: Press to set and activate the
short cut function.
9. Up and Down Buttons:
• Used to set the temperature.
• Press and hold both Up and Down buttons for 3
seconds to change the temperature display from
°C to °F.
10. LED Display:
• Shows the set temperature in °C or °F or the
auto-timer settings.
• While on Dry and Fan mode, shows the room
temperature.
Note: The remote control can be used at a
maximum distance of 8 meters (26 feet) from the
appliance. Using the remote control more than 8
meters (26 feet) away from the appliance can result
in poor reception of the signal.
1
2
3
4
9
10
9
5
8
7
6