Replacing Of The Illuminant; Removing Of The Door - Pkm BIC3 I-GK IX3 Mode D'emploi

5.1 Replacing of the illuminant

WARNING! Switch off the appliance and disconnect it from the
1.
mains
2. Remove the illuminant and replace it by a new one of the same kind and power:
 Heat-proof illuminant for ovens (300
3. Do not use any other illuminant.
 According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the ecodesign requirements for non-
directional household lamps. This means that bulbs, which are used in
household appliances, must not be used to illuminate domestic establishments.

5.2 Removing of the door

1. Move the
position.
2. Open the catch levers of the hinges
completely.
3. Move the door to a 60
by pulling it out of its hinges (toward you).
4. When reinstalling proceed in reverse order.
5. Do not reach into the hinges while removing the door. RISK OF INJURY!
door to horizontal
0
angle. Hold the door with both hands. Remove the door
0
C), 230-240VAC/25W.
45