Installation/Oven; Electrical Connection - Pkm BIC3 I-GK IX3 Mode D'emploi

a Hob

2.3 Installation/oven

Depending on model, you must connect the cable bundle of the hob to the
control panel of the oven before finally fixing the oven.
Insert the oven into its installation opening. You can install the oven below a
worktop or in a suitable piece of furniture. Fix the oven via the two fixing holes in
the frame. To locate the fixing holes, open the oven door and look inside. You
must meet the dimensions on the installation drawing (chapter 9) for proper
ventilation. Free space of at least 45 mm on the back of the oven is required.

2.4 Electrical connection

 The appliance must be connected to the mains by a qualified
professional, who is familiar with and adheres to the local
requirements and supplementary regulations of your electricity
supplier.
 All electrical work must be carried out by a qualified professional. Do
not modify the energy supply. The connection must be carried out in
accordance with the current local and legal regulations
Instructions for the installer (qualified professional)
 Remember that the connection wire should match the connection type and the
power rating of the cooker. The connection cable must be secured in a strain-
relief clamp. The ground wire must be connected to the marked clamp of the
terminal. The electric supply of the appliance must be equipped with an
emergency switch with a distance between the contacts of at least 3 mm which
disconnects the entire appliance from the mains in a case of emergency. Read
the information on the rating label and the connection diagram before
connecting the appliance to the mains.
b Panel
DANGER!
36
c Bracket