Instruction For Using The Luma Boost - Luma ACTIVE & BOOST Mode D'emploi

24
INSTRUCTIONS FOR
USING THE LUMA BOOST
SINGLE BUTTON
The LUMA BOOST is controlled via a single button. Learn more about it in
the videos which you can find in the Technology section on our website
http://www.luma-enlite.com.
USING THE BUTTON
Turn on/off: Press until the lights are turned on or off. When turned
off, the front lights flash three times
Switch back lights: Press for 1-2 seconds, the front lights flash
three times to confirm. The following back light modes are possible:
Permanent light – flashing light – no back light
To switch the front light mode: Press for < 1 second. The following
light modes are possible: Low beam weak – Low beam strong – Low
and high beam
MODE
1
2
3
4
LUMINOSITY RANGE
25 lm 5 m
60 lm 8 m
125 lm 30 m
220 lm 40 m
BATTERY LIFE
9 h – 15 h 30 min
5 h 30 min – 6 h 45 min
2 h 45 min – 3 h 15 min
1 h 40 min – 1 h 50 min