Promise Technology SMARTSTOR NS4600 Guide De Démarrage Rapide page 32

SmartStor NS4600 Quick Start Guide
4. Choose a folder from the Folder Name dropdown menu. (E)
5. In the New IP Address field, type the IP address of the UNIX or Linux PC
from which you will access this folder, then click the Add button.
6. Click the OK button in the confirmation box.
FOR CLIENT USER
On the UNIX/Linux PC with Command Line Interface
1. Open a terminal window.
2. Create a new folder for the SmartStor. Type mkdir SmartStor and press
Enter.
3. Mount the SmartStor. Type mount NAS4600 IP:/VOLUME1/PUBLIC/
SmartStor and press Enter.
Note that the IP address shown above is only an example. See "Finding the
SmartStor's IP Address" on page 18.
Volume1 and Public refer to the default Volume and folder created during
setup. If you created a different volume or folder, use those names.
4. Change to the SmartStor directory. Type cd /SmartStor and press Enter.
32