Télécharger Imprimer la page

SEVERIN KS 9834 Mode D'emploi page 18

Masquer les pouces Voir aussi pour KS 9834:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
Problem
The unit is not working.
The unit seems to generate insufficient
cooling power.
The normal operating sound changes or
becomes louder.
Transporting the appliance
The unit must be transported only in its vertical position.
Do not tilt it any more than 45°. During transport, ensure that the unit is properly secured
and protected against shock, vibration and shifting.
Disposal
This appliance has been manufactured from recyclable materials. After removing the
plug from the wall socket, the unit should be rendered unusable by cutting off the
power cord before being disposed of through special waste collection points in
accordance with local regulations. The refrigerant and the chemical agent in the insulation
foam must be disposed of through a competent agency. Take special care not to damage the
cooling circuit before the unit is handed over for competent disposal.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two
years from the date of purchase. Under this guarantee the manufacturer undertakes to
repair or replace any parts found to be defective, providing the product is returned to one of
our authorised service centres. This guarantee is only valid if the appliance has been used in
Possible cause and solution
Check that
- power is supplied.
- the switch in your home installation
fuse box is switched on.
- the wall socket is working. This can be
done by connecting another electrical
device to the socket and checking for
function.
Check whether
- too much food has been stored in the
unit.
- the thermostat is set to position 'MIN'
(in this case, set it to a suitable higher
value).
- the door is not properly closed.
- there is too much dust on the
condenser.
- the unit is too close to a wall or other
object at the rear or to the sides.
Check whether
- the unit has been properly positioned.
- any objects or obstructions are
touching the rear of the unit.
- there are any objects on top of the unit
which might be vibrating.
18

Publicité

loading