Main Unit Operation; Maintenance - Sharp GS-XP9FGR Notice D'utilisation

MAIN UNIT OPERATION

Use this operation when the remote control is not available.
TO TURN ON
Press the POWER button on the unit.
• The red OPERATION lamp (
will light and the unit will start operating in
the AUTO mode.
• The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp (
will turn off.

MAINTENANCE

MAINTENANCE AFTER AIR
CONDITIONER SEASON
1
Operate the unit in the COOL
mode, temperature setting 32°C,
for about half a day to allow the
mechanism to thoroughly dry.
2
Stop the operation and unplug
the unit. Turn off the circuit
breaker, if you have one exclu-
sively for the air conditioner.
3
Clean the filters, then reinstall
them.
) on the unit
) on the unit
MAINTENANCE BEFORE
AIR CONDITIONER SEASON
1
2
3
E-16
Make sure that the air filters are
not dirty.
Make sure that nothing obstructs
the air inlet or outlet.
Check the outdoor mounting rack
periodically for wear and to make
sure it is firmly in place.