Publicité
Les langues disponibles
Les langues disponibles
and the desired effect; the temperature can be adjusted at any time by pressing + or - (6).
•
After having selected the desired temperature, the button lock can be activated by pressing
the
button (5) twice and quickly. This function prevents accidental temperature changes
while using the straightener. The activation of the button lock is signalled by the LED (2)
going on; the lock can be deactivated by pressing the
•
The LED display (1) flashes until the plates reach the set temperature.
•
Once the temperature is reached, the LED display (1) remains on.
•
Take a thin lock of hair, which is the same width of the plate and not too voluminous, and
place it between the two plates.
•
Keep the lock of hair taut with one hand and slide the plate closed with the other hand, from
the roots down to the ends.
•
Consult the Easy Styling Guide to discover the numerous methods and effects that can be
achieved using the straightener.
•
Once the hair is styled, switch the appliance off by keeping the
disconnect the appliance from the socket.
NOTE: steam may appear while straightening; this is excess humidity in the hair
that evaporates.
IONIZER (only for I5902)
The plate has an ionizer, a device that produces ionization, which adds shine and
brightness to the hair. The "static hair" effect is also reduced.
AUTOMATIC SWITCH-OFF
The straightener switches off automatically 1 hour after being switched on.
•
Switch the appliance off by pressing the
the socket
•
Wait for the plates (8) to cool down
•
Clean the surface of the plates (8) and the handle with a soft, damp cloth.
ATTENTION! Make sure all cleaned parts are completely dry before reusing
the appliance!
STORING AND CARING FOR THE PRODUCT
ATTENTION! Once you have finished using the hair straightener, make sure it
has cooled down completely before putting it away. Never wrap the power
supply cord (4) around the appliance.
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
The appliance must be disposed of in compliance with the provisions of EU standard
2002/96/EC at the end of its life cycle.
This regards recycling useful substances in the appliance, which reduces environmental
impact. For further information contact the local waste authority or the appliance retailer.
To request repairs or purchase spare parts please contact IMETEC's authorised customer
service centre on the Number below or via the website.
The appliance is covered by the manufacturer's warranty. For details, read the attached warranty
sheet.
Failure to comply with the instructions for use and maintenance provided in this manual will
render the manufacturer's warranty null and void.
MANUEL D'INSTRUCTIONS POUR L'UTILISATION DU FER À LISSER
Cher client, IMETEC vous remercie d'avoir choisi ce produit.
ATTENTION ! Instructions et mises en garde pour
une utilisation sûre.
CLEANING
DISPOSAL
ASSISTANCE AND WARRANTY
FRANÇAIS
button (5) twice once again.
button (5) and disconnect the plug (4) from
7
button (5) pressed and
Publicité
Chapitres
