Useful Advice; Use; Cleaning; Storing And Caring For The Product - Imetec M2901 Manuel D'instructions Pour L'utilisation

• Understanding usage technique of the curling tong requires small initial precautions that will allow the desired effects to be obtained quickly.
The time of use is variable based on experience using the appliance and the desired hairstyle.
• Ensure the hair is dry, clean and without any trace of hairspray, hair mousse or gel.
• Comb the hair ensuring there are no knots.
• Start straightening from the nape of the neck, proceed on the sides and finish on the forehead.
• When using the curling tong, while it is heating or cooling, place it on a smooth and heat resistant surface.
• While straightening, be careful not to near the brush too much to the sensitive parts of the face, ears, neck or head.
• After use, allow the curling tong to cool down completely before putting it away.
PREPARING THE HAIR
• Wash hair as normal and comb removing knots.
• dry the hair and brush from the roots to the ends.
• divide hair into sections and start straightening from the nape of the neck.
USER INSTRUCTIONS
• Connect the power cable (1) to the mains and place the appliance on a smooth and heat resistant surface.
• Slide the On/Off button (10) to switch on the appliance.
• Turn the knob (4) or the temperarature adjustment buttons (5) to select the desired temperature; the operation LED (9) continues flashing
until the desired temperature is reached.
• Take a lock of hair, which is not too wide or voluminous between the finger (about 2 cm); more defined curls are obtained with smaller locks
of hair.
• Press the lever of the clamp and use your index finger to twist the lock of hair between the clamp (7) and the curling tong. It is important for the
end of the lock of hair to fit entirely in the roundness of the tong.
• Close the clamp (7).
• Wait for the lock to dry as desired before removing it from the tong by releasing the clamp (7).
• After use, switch the appliance off by pressing the Off button (10) for a couple of seconds.
• Unplug the power cable (1) from the socket.
CURLING TONG SETTING M2902
• The operation LEd (9) will light up.
• Rotate the temperature adjustment wheel (4) to set the desired temperature between 150°C and 210°C, depending on the type of hair and the
desired effect; the temperature can be adjusted at any time by rotating the wheel (4) clockwise (to increase the temperature) or anti-clockwise
(to decrease the temperature).
• The operation LED (9) flashes until the curling tong reaches the set temperature.
• Once the temperature is reached, the operation LEd (9) remains on.
CURLING TONG SETTING M2903/M2904/M2905
• The display (8) lights up.
• Select the desired temperature between 150°C and 210°C, depending on the type of hair and the desired effect; the temperature can be
adjusted at any time by pressing + or - (5).
• After having selected the desired temperature, the button lock can be activated by pressing the + button (5) for a couple of seconds. This
function prevents accidental temperature changes while using the curling tone. The activation of the button lock is signalled by the operation
LEd going on; the lock can be deactivated by pressing the + button (5) for a couple of seconds again.
• The display (8) flashes until the curling tong reaches the set temperature.
• Once the temperature is reached, the display (8) remains on.
• disconnect the appliance from the mains (1).
• Make sure the appliance is cool.
• Clean the external and internal surfaces of the heated parts (2) and the handle of the appliance using a soft and damp cloth.
• Let it dry completely before starting it up again.
IMPORTANT! Make sure all cleaned parts are completely dry before reusing the appliance.

STORING AND CARING FOR THE PRODUCT

ATTENTION! After having finished using the appliance, make sure it has completely cooled down before putting it away.
Never wrap the power supply cord (1) around the appliance.
The product is packaged in recyclable materials. dispose of it in compliance with the environmental
protection standards. Pursuant to Art. 26 of Italian Legislative decree no. 49 of 14 March 2014
"Implementation of Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)" the
crossed bin symbol on the appliance or its packaging indicates that the product must be disposed of
separately from other waste at the end of its useful life. The user must therefore take the appliance to an
appropriate recycling centre for electrical and electronic equipment. Alternatively, instead of handling
the disposal, the appliance can be handed over to the retailer when a new, equivalent appliance is

USEFUL ADVICE

USE

CLEANING

DISPOSAL

6