Useful Tips; Instructions For Use; Use; Storage - Imetec N5801 Instructions Pour L'emploi

For the appliance features, refer to the external packaging.
Use only the supplied accessories.
• The experience you will soon acquire in using your air styler, will help you determine how long
your hair will take to achieve the desired effect.
• Every time you use the appliance, make sure the hair is clean and without any trace of
hairspray, hair mousse or gel.
• Always start from the nape of the neck, proceed on the sides and finish on the forehead.
• When using the styler or while it is heating or cooling, place the appliance on a smooth and
heat resistant surface.
• When creating the hairstyle, be careful not to bring the air styler close to sensitive parts of
the face, ears, neck or skin.
• After use, allow the air styler to cool down completely before putting it away.
PREPARING YOUR HAIR
• Wash hair as normal and comb to remove knots.
• Dry your hair and brush from the roots to the ends.
OPERATION
• This styler works with air, which means it works according to the same principle of a common
hair dryer: the hot air comes out from the main body and passes through the holes of the
accessories. When using the styler or while it is heating or cooling, place the appliance on a
smooth and heat resistant surface.
• Choose the relevant accessory according to the style you desire.
• Insert the required accessory and turn its base until it clicks in.
• Connect the air styler to the mains.
ACCESSORIES
Round brush (6-7)
Steps for optimal results:
• Switch the air styler ON.
• Wrap a lock of hair around the barrel of the brush (6-7), which should be of the same width.
• Select the rotation key (1) and gently accompany the brush downwards.
• To improve the shine of the lock hold the rotation button (1) and let the bristles gently caress
the end part of the lock.
• Depending on the desired effect and the side being treated, move the rotation button to the
right or the left.
• Once the hair is styled, switch off the appliance from the button (3) and disconnect the brush
from the socket.
Note: steam may be emitted while the brush is used; this is excess humidity in the hair that
evaporates.
Set the air flow and temperature to the following levels with the (3) button:
• 0 = OFF
• 1 = Medium air flow and Medium temperature
• 2 = High air flow and High temperature
•
= Cold air shot to set the hair
IONIZER
This air styler is fitted with an ionizer that is automatically activated when the appliance
is switched on and reproduces the phenomenon of ionization, which adds shine and
brightness to the hair. The electrostatic effect is also reduced.
When the air styler is not used, unplug the appliance from the socket and store it in a dry
and dust-free place. Wait for the barrel to be cold.
Do not wind the power cord around the appliance. Coil it up loosely
without bending it.
ATTENTION! Switch the appliance off and unplug it from the socket before
cleaning! Make sure all cleaned parts are completely dry before reusing
the appliance!

USEFUL TIPS

INSTRUCTIONS FOR USE

USE

STORAGE

MAINTENANCE AND CLEANING

7