HQ Power HQPE10007 Mode D'emploi page 5

Do not operate a visibly damaged device. Do not attempt to operate this device
if the power cord has been frayed or broken.
Always mount this device in a safe and stable manner. Mount this device in an
area that will allow proper ventilation. Allow about 15 cm between this device
and a wall.
This device should only be serviced by qualified service personnel.
Do not use the luminaire with a cracked or broken protective shield. Disconnect
immediately from the mains. The protective shield is not replaceable.
Familiarise yourself with the functions of the device before actually using it.
Keep this manual for future reference.
Always make sure to connect the device to an alternating current matching the
value stated on the device.
Always install the device in a well-ventilated location.
Keep this device away from dust and extreme temperatures. Make sure the
ventilation openings are clear at all times. For sufficient air circulation, leave at
least 2.5 cm in front of the openings.
Never connect the device to a dimmer or rheostat.
Never carry or move the device from the power cord or any other moving part.
Always use the bracket.
In the event of an operating problem, stop using the device immediately.
Never try to repair the device. There are no user-serviceable parts inside the
device. Refer to an authorized dealer for service and/or spare parts.
This device is not designed for permanent operation: regular operation breaks
will prolong its live.
Indoor use only. Keep this device away from rain, moisture, splashing and
dripping liquids. Never put objects filled with liquids on top of or close to the
device.
This device is not suitable for ordinary lighting in household room illumination.
Please affix the included laser sticker to the device according to the language of the country of purchase.
V. 02 – 26/04/2018
HQPE10007
5 ©Velleman nv