HQ Power HQLP10007 Mode D'emploi page 8

6.2 Menu
mode
auto
sound
speed
sensitivity
silent scene
inFr
addr
slave
RGB
colour
dimming
6.3 Stand-Alone Mode
The device starts running in stand-alone mode after connection to the mains. This mode
allows you to use the device without controller.
6.4 Master/Slave Mode

The master/slave mode allows for connecting several devices to a single master device
in a daisy chain.

All slave devices will then work synchronously with the master device.

Configure all slave units before connecting the master unit to the daisy chain.
V. 02 – 05/03/2019
HQLP10007
programme description
Au1-3 auto programme 1-3
So1-3 sound programme 1-3
SP1-9 adjustable speed
SE1-9 adjustable microphone sensitivity
ON closed light when no music in sound mode
OFF open light when no music in sound mode
ON IR remote signal reception enabled
OFF IR remote signal reception disabled
4CH/8CH d001-d512
Slav slave mode
red 0-255
green 0-255
blue 0-255
UV 0-255
C1 red
C2 green
C3 blue
C4 UV
C5 red + green
C6 red + blue
C7 red + UV
C8 green + blue
C9 green + UV
C10 blue + UV
C11 red + green + blue
C12 red + green + UV
C13 red + blue + UV
C14 green + blue + UV
C15 red + green + blue + UV
dim1-9 adjustable dimming value
8
4/8 channels DMX mode
©Velleman nv