F.F. Group ELM 42/1800 PLUS Notice Originale page 43

ELM 42/1800 PLUS
PROBLEM
Motor does not run
Motor power drops
Motor performance
drops
Grass collection bag not
filling sufficiently
ENGLISH
TROUBLESHOOTING
REMEDY
Unplug the unit from the power source and check that the blade is able to
rotate freely. If the lawn mower was previously in use, let the motor cool
down because the electrical brake could still be engaged
Check mains, extension cord, and circuit-breaker (fuse)
Clean discharge channel/housing
Start lawn mower on short grass or in a previously mowed area and tilt back
Correct the cutting height
Check that you are using a suitable extension cord of proper gauge and length
Power source (e.g. generator) has too low voltage
Air vents are blocked
Correct the cutting height
Clean discharge channel/housing
Replace or resharpen mowing blade (contact an authorized service center)
Correct the cutting height
Allow the lawn to dry
Clean the grille on the grass collection bag
Clean the discharge channel/housing
English | 43
www.ffgroup-tools.com