Technical Information; Installation Considerations - Hansgrohe AXOR Starck 10458 1 Série Instructions De Montage / Mode D'emploi / Garantie

Tools Required / Outiles Utiles /
Herramientas Útiles

8 mm
English

Technical Information

Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate - spout
Flow rate - handshower
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.

Installation Considerations

• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• Protection against backflow is provided by check
valve and an automatically resetting diverter.
• This trim is for use with rough 1045181 (not
included). The rough must be installed and the
finished floor surface completed and made
watertight.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
10° - 140° F*
176°F*
5.8 GPM
max. .5 GPM