Ergotron DS100 Série Manuel De L'utilisateur page 4

5
Adjustment · Ajuste · Réglage · Einstellung · Instellen · Regolazione · 調整 · 调节 · 조절
IMPORTANT! This product will need tension adjustments once installation is complete. Make
sure all equipment is properly installed on the product before attempting range of motion
or tension adjustments. Any time equipment is added or changed on this product resulting
in a diff erent mounted weight, you should repeat the adjustment steps to ensure safe and
optimum operation. This product should move smoothly and easily through the full range
of motion and stay where you set it. If movement is diffi cult or the product does not stay
where you set it, follow the adjustment instructions to loosen or tighten the tension to create
a smooth, easy motion. Depending on your product and the adjustment, it may take many
turns to notice a diff erence.
a
b
c
4 of 5
1/2"
(13mm)
1/2"
(13mm)
1/2"
(13mm)
1/2"
(13mm)
2x
2x
1/2"
(13mm)
888-47-051-00 rev. C • 08/12