Selection & Operating Of The Menus; Menu Selection - STEAMAX G150 Manuel D'utilisation

STEAMAX G150 – SELECTION & OPERATING OF THE MENUS

Menu Selection

1. Press the Fire button rapidly 5 times within 2 seconds to switch on the device. "G150" will be shown on the
display. The device is now switched on.
2. Press the Fire button rapidly 3 times while the device is switched on. Menus 1 to 4 will be displayed. Use
the "UP" and/or "DOWN" buttons to navigate to the menu you want to select.
Menu 1 – Setting of the Operating Mode
If you select menu 1, the symbol
down the Fire button to enter the submenu:
You can select from the steam modes "WATT MODE", "TEMP/TC MODE" or "MEMORY MODE" by pressing the "UP"
or "DOWN" button.Press the Fire button in the „WATT MODE" to select the strength of the drag effect.
Press the Fire button in the „TEMP/TC MODE" to select the strength of the puff effect, then the material (NI, TI,
SS) from which the coil of your atomizer head is made. Then adjust the temperature coefficient of the resistance
(TCR) by pressing the adjustment buttons.
will be shown on the display screen. Just wait 5 seconds or press and hold
www.steamax.com
65