Bartscher IK 30TC Mode D'emploi page 30

 With the
range of
Range 1 corresponds to 400 W and range 10 corresponds to 3000 W of power.
The power level remains displayed on the LED display and the
light is lit.
2. Setting the temperature
 Press the
 The preset temperature level 120° C is displayed and the device turns on.
 With the
of 60 – 240°C.
(Temperature range: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240° C).
The temperature range remains displayed on the LED display and the
temperature control light is lit.
 The device heats the food and maintains the set temperature at a constant level.
Wherein the power regulation occurs automatically.
NOTE!
If the device is switched on without putting on it cookware or the cookware is
removed from the device, a repeated warning signal will sound and the device turns
off after about 30 seconds.
Timer:
After selecting the mode (power level or temperature range), press the
The display shows "0" and the
With the or button you can choose the operating time of the device in 5 minute
intervals (up to a maximum of 120 minutes).
The time duration is counted down in minutes, while the display will jump to the previous
displayed message (power level or temperature range).
After the set time has lapsed, a signal will sound and the device automatically switches to
standby mode.
NOTE!
During the timer function operation, the time can be changed at any moment by
pressing the or
temperature range setting remains unchanged.
or button you can change at any time the setting in the
(400 - 3000 W).
button once.
or button you can change at any time the setting in the range
LED time indicator turns on.
button. Thanks to the device's memory the power level or
LED control
LED
button.
- 29 -