Kicker KS Série Manuel Du Propriétaire page 6

COAXIAL MOUNTING
The KS-Series Component system can also be mounted coaxially by attaching the tweeter to the center
of the midrange. For coaxial mounting, unscrew and remove the phase plug from the center of the KS
midrange driver. Next, run the tweeter wires through the mounting post into the center of the midrange
driver and out of the back plate hole. Connect the tweeter assembly to the mounting post and screw the
mounting post into the center of the midrange driver. After the tweeter has been secured to the midrange,
route the wiring through the wire groove on the back plate of the midrange and attach the tweeter wires to
the wire tab with the included cable tie. See below.
6
2011 KS Components Multilingual d01.indd 6 2011 KS Components Multilingual d01.indd 6
coaxial mounting adapter (mount fi rst)
KS Component Speakers
tweeter (mount second)
KS Crossover
INPUT
+
-
wire tab
tweeter wires
speaker wires
phase plug
MID
TWEETER
- + +
-
8/4/2010 11:05:07 AM 8/4/2010 11:05:07 AM