Numark Party Mix MKII Guide D'utilisation page 5

15. Cue: When the Deck is paused, you can set a Temporary Cue Point by moving the
Platter to place the playhead at the desired location and then pressing the Cue button.
During playback, you can press the Cue button to return the track to this Temporary Cue
Point. (If you did not set a Temporary Cue Point, then it will return to the beginning of the
track.)
16. Play/Pause: Starts and suspends playback.
17. Performance Pads: These pads can be used to trigger Hot Cues, Loops and Samples,
and to apply effects. To change the function of the pads, press the Pad Mode button.
18. Pad Mode: Press this button to change the current function of the Performance Pads.
• Cue: Each pad assigns at Hot Cue Point, or returns the track to that Hot Cue Point.
When a pad is unlit, you can assign a Hot Cue Point by pressing it at the desired
point in your track.
• Loop: Each pad triggers and auto-loop of a different length.
• Sampler: Each pad triggers a sample in Serato DJ Lite.
• Effects: Pads 1–3 on each deck trigger an effect. Pad 4 on each deck cycles
through time divisions for beat-based effects, from 1/16 to 8 beats.
19. Pad Mode Indicator: These LEDs indicate the current setting of the Performance Pads.
Left Side Panel
1. USB: This USB connection sends and receives audio and
control information from a connected computer.
2. Main Output (1/8" / 3.5 mm): Use standard 1/8" / 3.5 mm
cables to connect this output to speakers or an amplifier
system.
3. Headphone Output: Connect headphones to this 1/8" (3.5 mm) jack for monitoring the
signal. The headphone volume is controlled using the Cue Gain knob.
Right Side Panel
1. Party Ball Mode: Press this button to cycle between the different lighting
modes for the Party Balls.
i. Serato DJ Lite color-controlled (default when powered on)
Note: In this mode, you can select from three lighting control patterns in
the Serato DJ Lite Setup > Mixer menu.
ii. Serato DJ Lite beat-controlled
iii. Fixed-timing random
iv. All on
v. Off
Rear Panel
1. Party Balls: When activated, these lights will illuminate
according to the current Party Ball Mode setting.
1
2
1 1
3
1
1
5